YJJ SSCMNNN030PA2A3 Indoor Air Pressure Control Digital I2C Absolute Pressure 200Kpa Pressure Sensor

Product Description:

SSCMNNN030PA2A3 Indoor Air Pressure Control Digital I2C Absolute Pressure 200Kpa Pressure Sensor

Features:

Circuit board installs the TruStability? SSC series compensating pressure sensor with a range of ±2% FSS to ±4% FSS TEB. *** (Differential pressure, gauge pressure), low (absolute pressure, differential pressure, gauge pressure). Digital or analog output. DIP, SIP, SMT

Pressure range

±1.6 mbar to ±10 bar, ±160 Pa to ±1 MPa, ±0.5 inH2O to ±150 psi

The TruStability standard accuracy silicon ceramic (SSC) series is a piezoresistive silicon pressure sensor that offers proportional analog output or digital output, enabling the provision of pressure readings within the specified full-scale pressure range and temperature range.

The SSC series can perform comprehensive calibration and temperature compensation for sensor zero position, sensitivity, temperature coefficient and non-linearity using the dedicated integrated circuits on the circuit board. The calibrated analog output values and digital output values are updated at rates of approximately 1 kHz and 2 kHz respectively.

The SSC series can be calibrated within a temperature range of -20°C to 85°C [ -4°F to 185°F ]. This sensor is characterized by its ability to operate under a single power supply of 3.3 Vdc or 5.0 Vdc.

These sensors can measure absolute pressure, gauge pressure or differential pressure. The absolute pressure type sensor uses vacuum pressure as the internal reference value, and its output value is proportional to the absolute pressure. The gauge pressure type sensor uses atmospheric pressure as the reference and provides an output value that is proportional to the difference from atmospheric pressure. The differential pressure sensor can measure the pressure between the two pressure ports.

TruStability? The pressure sensors are designed to be used in conjunction with non-corrosive and non-ionized gases, such as air and other dry gases. Through a wide range of options, the performance of these sensors can be extended to pressure ranges higher than 40 mbar, 4 kPa, and 20 inH2O.

Pressure type: Absolute

Work pressure range: 0 psi to 30 psi

Accuracy: 0.25 %

Output type: Digital

Installation style: SMD/SMT

Interface type: I2C

Operating power supply voltage: 3 V

Port type: Manifold

Resolution: 12 bit

Package / Housing: SMT-8

Minimum operating temperature: -40 °C

Maximum operating temperature: +85 °C

Series: SSC

Package: Bulk

Working power current: 1.6 mA

Product type: Board Mount Pressure Sensors 50

Subcategory: Sensors

Maximum power supply voltage: 3.3 V

Minimum power supply voltage: 3 V

Trademark name: TruStability

Unit weight: 3.200 g

Specifications: